This may seem like a simple question, but it turns out that the answer is not one size fits all. To find the answer to this specific question you’ll need to understand what exactly “head” means in this context. The head of a bolt refers to how far down from the top your threading starts on any given item, and for bolts with heads larger than 1/2 inch (12 mm) typically use an imperial measurement system rather than metric measurements.

The “bolt head size chart” is a tool that allows you to find the bolt head size for any given bolt. The bolt head size is the diameter of the circular part at the top of a screw or bolt.

Bolt Head/Wrench Size in US

Bolt Dimensions | Head and Wrench Dimensions | |
---|---|---|

Square Bolt – Hex Bolt – Lag Bolt | Hex Bolt (Heavy) | |

5/8″ | 15/16″ | 1-1/16″ |

3/4″ | 1-1/8″ | 1-1/4″ |

7/8″ | 1-5/16″ | 1-7/16″ |

In this case, what size nut fits a 1 1/8 bolt?

Heavy Hex Nuts ASME B18. 2.2 Dimensions Used with Stud Bolts ASME B16. 5

SIZE | Flats Across Width | |
---|---|---|

Basic | Min | |

1/2 | 7/8 | 0.850 |

5/8 | 1.1/16 | 1.031 |

3/4 | 1.1/4 | 1.212 |

What is the size of a 1/4 bolt, for example?

DIMENSIONS OF HEX BOLT IN TABLE B1 | ||
---|---|---|

Bolt Size | A (max) | F Bolt Thread Length F Thread Length F Bolt Thread Length F Bolt Thread Length F Bolt |

1/4″ | 0.260 | 0.750 |

5/16″ | 0.324 | 0.875 |

3/8″ | 0.388 | 1.000 |

In addition, what bolt size has a 1 7/8 head?

Bolt Dimensions (in) | Head and Wrench Dimensions (in) | |
---|---|---|

Bolt with a hexagonal head Square Bolt Lag Bolt | Hex Bolt (Heavy) | |

7/8 | 1 5/16 | 1 7/16 |

1 | 1 1/2 | 1 5/8 |

1 1/8 | 1 11/16 | 1 -3/4 |

A bolt with a 36mm head is what size?

Dimensions of Metric Hex Bolts

SIZE NOMINAL (D) | BODY MEASUREMENTS | THICKNESS OF THE HEAD |
---|---|---|

m20 | 20.00 | 12.88 |

m24 | 24.00 | 15.44 |

m30 | 30.00 | 19.48 |

m36 | 36.00 | 23.38 |

Answers to Related Questions

## A 1/2 wrench is used to tighten what size nut?

Bolt Head/Wrench Size in US

Bolt Dimensions | Head and Wrench Dimensions | |
---|---|---|

Square Bolt – Hex Bolt – Lag Bolt | Hex Bolt (Heavy) | |

5/16″ | 1/2″ | – |

3/8″ | 9/16″ | – |

7/16″ | 5/8″ | – |

## How do you know what size nut you require?

Stretch the tape measure across the diameter of the nut to the flat side exactly across from where you’re tugging. To get the measurement of a metric nut, count the number of lines on the tape measure. The size is a 9-mm (millimeter) nut if you count 9 lines.

## A 10mm wrench will fit what size nut?

Bolt Head/Wrench Size in Metric

Bolt Dimensions (mm) | Size of the head/wrench (mm) | |
---|---|---|

ANSI/ISO | DIN | |

4 | 7 | 7 |

5 | 8 | 8 |

6 | 10 | 10 |

## What are the common bolt sizes?

Bolt Thread Length in the United States

Bolt Dimensions | Thread Length (in.) * Standard Thread Length (in.) | |
---|---|---|

6 inch and shorter bolts | Bolts with a length of more than 6 inches | |

1/4″ | 3/4″ | 1″ |

5/16″ | 7/8″ | 1-1/8″ |

3/8″ | 1″ | 1-1/4″ |

## What are the dimensions of typical metric bolts?

Inch & Metric Thread Standards. Metric thread sizes are specified differently than inch thread sizes. For example, a 3/8-16 (coarse) thread has a 3/8″ nominal major diameter and 16 threads per inch, while a 3/8-24 (fine) thread has the same nominal major diameter and 24 threads per inch.

## What size is the next up from a 5/8?

This package comprises SINGLE tapers in the sizes listed below. 0 gauge (eight millimeters), 00 gauge (10 millimeters), 7/16 (11 millimeters), 1/2 inch (12 millimeters), 9/16 inch (14 millimeters), 5/8 inch (16 millimeters), 3/4 inch (19 millimeters), 7/8 inch (22 millimeters), and 1 inch (25mm).

## What is the diameter of a 15mm bolt?

Wrenches in the following sizes are required: 11,13,15,17,19,22,24,27,30,32,36mm. I think the M8 bolt that comes with the 15mm wrench is the correct one. The heads of M8s are normally 12 or 13mm in diameter.

## What is the diameter of a m10 bolt’s head?

Shoulder Bolt Dimensions in Metric

Diameter of the Shoulder (A) | a strand (C) | Length of Thread (D) |
---|---|---|

8mm | 6mm x 1.0 | 11.25mm |

10mm | 1.25mm x 8mm | 13.25mm |

12mm | 1.5mm x 10mm | 16.4mm |

16mm | 1.75mm x 12mm | 18.4mm |

## What is the size of a cloth bolt?

A bolt is a common unit of measurement for a wide range of materials, from wood to canvas, that are normally kept in rolls. The length is normally 40 or 100 yards, although it varies depending on the fabric. A bolt of canvas, for example, is traditionally 39 yards.

## What is a Hex Bolt (Heavy)?

Heavy hex structural bolts are designed for steel-to-steel connections and include ASTM A325 and A490 specifications, which covers bolts from 1/2” up to 1-1/2” in diameter. Since these Hex Bolt (Heavy)s are intended for structural connections, they have shorter thread lengths than standard hex bolts.

## What size do you go up to after 3 8?

Bolts Wrench Size Chart

Bolt Dimensions | Wrench Dimensions (Standard) | Wrench Dimensions (Metric) |
---|---|---|

3/16″ | 3/8″ | 10mm |

1/4″ | 7/16″ | 11mm |

5/16″ | 1/2″ | 13mm |

3/8″ | 9/16″ | 15mm |

## What is the size of the socket?

1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters), and 3/4 inch (1.6 centimeters) are the four most common socket sizes (1.9 centimeters). There are several sizes in between, beginning at 1/4 inch (0.6 cm) and ascending by sixteenths of an inch (0.16 centimeters).

## For a m12 bolt, what size hole do I need?

When utilizing the M12 Bolt, a 12mm diameter hole must be drilled into the substrate, and a 14mm diameter clearance hole must be drilled in the object to be fastened in place.

## What is the diameter of a m8 bolt head?

Hexagon Head Bolt, M8 x 75mm

## In terms of bolt sizes, what does M stand for?

metric

## What is the size of m12?

They should be measured. The M8 will have a diameter of roughly 8 mm, and will most likely be somewhat undersized ” (. 31496″) The M10 (. 3937) has a diameter of approximately 10 mm “) and the M12, which has a diameter of about 12 mm, (.

## What is the diameter of a m6 bolt head?

The “M” mark for metric screws refers to the screw’s nominal outside diameter in millimetres (e.g., an M6 screw has a nominal outer diameter of 6 millimetres).

The “7/16 bolt head size” is a standard metric measurement. It has a 7mm diameter and 16 threads per inch. This size is commonly used in the automotive industry, as well as other industries.